| TYPE |
NEW RESIN CODE |
OLD RESIN CODE |
PROPERTIES AND APPLICATION |
| FRP RESIN |
DS-102 N |
DS-238 |
Orthophthalic type, low viscosity and medium reaction rate unsaturated polyester resin. It has similar refractive index with glass fiber and good glass fiber wet out property. It is suitable for high clarity FRP sheets and transparent products. |
| DS-137 |
DS-197 |
Tertphthalic type, medium viscosity and higher reaction rate unsaturated polyester resin. It gives high HDT and corrosion resistant. It is suitable for hand lay up and filament winding applications. |
| DS-152 |
DS-196C |
General type, medium viscosity and higher reaction rate unsaturated polyester resin. It is suitable for grate products. |
| DS-196 |
DS-196 |
General type, medium viscosity and higher reaction rate unsaturated polyester resin. It is suitable for the manufacture of general FRP products, cooling tower and dilute acid can, etc. |
| DS-199 |
DS-199 |
Orthophthalic type, medium viscosity and higher reaction rate unsaturated polyester resin. It gives high HDT and good rigidity. It is suitable for the manufacture of FRP mould. |
| DS-325 PT |
|
Pre-accelerated, thixotropic unsaturated polyester resin. It gives waterproof, high mechanical properties and no sag on vertical surface. It is suitable for sanitary components and cooling tower. |
| DS-355 N |
DS-355A |
Orthophthalic type, higher viscosity and reaction rate unsaturated polyester resin. It gives good adhesion and wet-out properties. It is suitable for the adhesion of deck plate. |
| DS-603 |
|
Isophthalic type, medium viscosity and higher reaction rate unsaturated polyester resin. It gives high mechanical properties and HDT. It is suitable for pultrusion, filament winding and hand lay up. |
| DS-628 |
DS--103 |
Orthophthalic type, low viscosity and medium reaction rate unsaturated polyester resin. It gives good glass fiber wet out properties and high HDT. It is suitable for pultrusion, especially for the manufacture of tent pole and fishing rod. |
| DS-659 |
DS-103-1 |
Orthophthalic type, low viscosity and medium reaction rate unsaturated polyester resin. It gives waterproof, good glass fiber wet out and defoaming properties. It is suitable for filament winding, such as glass fiber reinforced sandwich laminate pipeline and FRP products. |
| SMC/BMC RESIN |
DS-822 N |
DS-866 |
Orthophthalic type, high viscosity and reaction rate unsaturated polyester resin. It gives low shrinkage ratio, high gloss and HDT. It can be used as SMC/BMC molding compounds for electric switch, bumper, radar antenna, seat and water tank, etc. |
| DS-825 N |
DS-868 |
Orthophthalic type, high viscosity and reaction rate unsaturated polyester resin. It gives low shrinkage ratio, high gloss and HDT. It can be used as SMC/BMC molding compounds for electric switch, bumper, radar antenna, seat and water tank, etc. |
|
|
|
|
|
| TYPE |
NEW RESIN CODE |
OLD RESIN CODE |
PROPERTIES AND APPLICATION |
| CHEMICAL RESISTANT RESIN |
DS-272 N |
DS-3302 |
Propoxyl bisphenol A modified unsaturated polyester resin. It gives good heat resistant, high mechanical properties and excellent corrosion resistant. |
| DS-276 |
DS-268 |
Transmission, reactive, fire-retardant, low viscosity and medium reaction rate unsaturated polyester resin. It gives good glass fiber wet out and is suitable for the manufacture of transmission, fire-retardant FRP products, especially suitable for chlorine alkali industry. |
| MARINE RESIN |
DS-189 S |
DS-189S |
Orthophthalic type, acetic anhydride capped unsaturated polyester resin. It gives good mechanical properties, waterproof and have been approved by Chinese Classification Society (CCS). It is suitable for the manufacture of FRP products, especially FRP boat and cooling tower. |
| DS-195 S |
DS-195S |
Isophthalic type, medium viscosity and higher reaction rate unsaturated polyester resin. It gives waterproof, heat resistant, acid-resistant and high mechanical properties. It has been approved by Chinese Classification Society (CCS) and is suitable for the manufacture of boat, cooling tower, etc. |
| DS-305 S |
DS-305S |
Pre-accelerated, thixotropic and acetic anhydride capped unsaturated polyester resin. It gives waterproof, high mechanical properties and no sag on vertical surface. |
| GEL COAT |
DS-301 S |
DS-301S |
Isophthalic/NPG type gel coat resin for hand lay up. It gives good mechanical properties, weatherproof, waterproof and have been approved by Chinese Classification Society (CCS). It is suitable for boat, FPR products and other waterproof and weatherproof required products. |
| DS-303H |
DS-303 |
Isophthalic type gel coat resin for hand lay up. It gives good mechanical properties, flexibility and high surface hardness. It is suitable for the manufacture of mould and other FRP products. |
| DS-308 |
|
Isophthalic/NPG type gel coat resin for spray. It gives high hardness, good transparent, waterproof and weatherproof. It is suitable for artificial marble and sanitary components or other good waterproof and weatherproof required products. |
| DS-396 H |
DS-306 |
Orthophthalic type gel coat resin for hand lay up. It gives good weathering properties and high gloss. |
|
|
|
|
|
| The detail technical data of all kinds of resin see the technical sheets. |
|
|
|
|
|
| Zhejiang Tianhe Resin Co., Ltd |
Shanghai New Tianhe Resin Co., Ltd. |
| Xianrentun, Linhai, Zhejiang 317000, P. R. China |
5995 Daye Road, Fenxian Distribute, Shanghai 201404, P. R. China |
| Tel: (+86) 0576-5177699 |
Tel: (+86) 021-57481313 |
| Fax: (+86) 0576-5178258 |
Fax: (+86) 021-57480370 |
